A Comprehensive Guide to Pour in Place Rubber Surfacing for Schools and Daycares

As a school or daycare owner, ensuring the safety of children on your premises is of utmost importance. The surface on your playgrounds and play areas should be a top priority as children will be running, jumping, and playing on them. One of the best ways to ensure safety is to install pour-in-place rubber surfacing. This type of surface is durable, slip-resistant, and provides excellent cushioning to prevent injuries.

What is Pour-in-Place Rubber Surfacing?

Pour-in-place rubber surfacing is a type of surface used on playgrounds, sports fields, and other outdoor play areas. It is made of rubber granules that are mixed with a binder and then poured onto a prepared surface. The surface is then troweled to achieve a smooth finish. This type of surface is also customizable, allowing you to choose from a range of colors and designs.

Advantages of Pour-in-Place Rubber Surfacing

  1. Safety: Safety is the primary advantage of pour-in-place rubber surfacing. The surface provides excellent cushioning and slip-resistance, which reduces the risk of injuries.
  2. Durability: This type of surface is highly durable and can withstand heavy foot traffic, harsh weather conditions, and UV rays.
  3. Low Maintenance: Pour-in-place rubber surfacing is relatively low maintenance. It is easy to clean, does not require painting, and can withstand heavy use.
  4. Customizable: You can choose from a range of colors and designs to match the aesthetic of your school or daycare.

Installation Process of Pour-in-Place Rubber Surfacing

The installation process of pour-in-place rubber surfacing involves the following steps:

  1. Surface Preparation: The surface on which the rubber surfacing will be installed needs to be prepared. The surface should be smooth, level, and free of debris.
  2. Mixing the Rubber Granules and Binder: The rubber granules and binder are mixed in a machine until a homogenous mixture is formed.
  3. Pouring the Mixture: The mixture is then poured onto the prepared surface and spread evenly.
  4. Troweling the Surface: The surface is troweled to achieve a smooth finish.
  5. Curing: The surface is left to cure for a minimum of 24 hours.

Maintenance of Pour-in-Place Rubber Surfacing

To maintain the quality and safety of pour-in-place rubber surfacing, regular cleaning and maintenance are necessary. Here are some maintenance tips:

  1. Remove debris and dirt regularly using a broom or a leaf blower.
  2. Clean the surface with mild detergent and water. Avoid using harsh chemicals or power washers.
  3. Inspect the surface regularly for any damages or signs of wear and tear.
  4. Repair any damages immediately to prevent injuries.


Pour-in-place rubber surfacing is an excellent choice for schools and daycares looking for a safe, durable, and low-maintenance surface for their playgrounds and play areas. It provides excellent cushioning and slip-resistance, reducing the risk of injuries. The installation process is straightforward, and the surface is customizable to match the aesthetic of your school or daycare. Regular cleaning and maintenance are necessary to maintain the quality and safety of the surface.

Related Post

Leave a Reply

Your email address will not be published. Required fields are marked *